Jacket Patch Kit is made up of thermal insulation, heat reflective tape to hold the insulation in place, and a black self-sealing patch tape for weatherproofing the bundle. It is to be used to insulate an area where two bundles have been spliced together and the tubes connected with a tube fitting.
entry seal kit provides a waterproof fitting where CM TECH PRE-INSULATED TUBE enters an enclosure. The thermally stabilized, modified Fire-resist plastic entry seal consists of threaded assembly that seals at the enclosure and a silicon rubber, NBR packing that seals to the tubing..
CM-ESS-Heat shrinkable boots are a series of heat-shrinkable end seal boots made of a thermally stabilized, modified polyolefin. They are designed to provide a weatherproof seal at the end of tubing bundles. These boots may be used for process temperatures up to 204℃
Flexpak strip insulation is designed to provide effective insulation on a temporary or emergency basis. Strip insulation is 4”wide, jacketed 1/2” thickness insulation. It can be wrapped around equipment to provide temporary insulation or emergency insulation on critical equipment. It is made of the same high-quality glassfiber insulation material as all flexpak products.
Typical installation on pressure switch and block/bleed valve
Product as shipped
Two seams sewn 1/2” apart make it easy to cut 10’ lengths by snipping between the seams with scissors.